Publicité
Assembly
1
Attaching the "X" shape support bar
to the connector
□
Attach the "X" shape support bar (B) to the connector (C)
using M6x20mm bolts (BB) and M6 washers (CC).
□
Tighten all M6x20mm bolts (BB) with the M6 - M8 wrench (EE).
□
Cover the bolt heads with M6 bolt caps (DD).
B
C
3
Attaching the table base to the connector
□
Attach the table base (D) to the connector (C) using M6x20mm
bolts (BB) and M6 washers (CC).
□ Tighten all M6x20mm bolts (BB) with the M6 - M8 wrench (EE).
□ Cover the bolt heads with bolt caps (DD).
D
B
A
C
2
Attaching the "X" shape support bar
to table top
□
Attach the "X" shape support bar (B) to the table top (A) using
M6x3 5 mm bolts (AA) and M6 washers (CC).
□
Tighten all M6x3 5 mm bolts (AA) with the M6- M8 wrench (EE).
□
Cover the bolt heads with M6 bolt caps (DD).
NOTE: Please ensure all M6 bolts are aligned and
assembled correctly. Fully tighten the bolts.
DD
BB
C
CC
B
A
4
Positioning the table
□ Turn the table over. The table is now ready for use.
DD
BB
CC
4
DD
AA
CC
Publicité
