Publicité
STEP 9
8
B
ameriwoodhome.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
8
AND MUST BE INSTALLED PROPERLY.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
(x34)
Distance from corner to corner must be equal as shown.
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
BACK
PNL
F
Flush bottom edge of the
back panel with the bottom
edge of bottom (F).
16
Raw
Surface
Edge with three holes will
be at bottom of unit.
Publicité
