Publicité
3.3
log placement
3.3.1 log placement for TDI3-1 / TDI3E-1
WARNING
!
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
PHAZER™ log and glowing embers, exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect
that is different in every installation. Take the time to carefully position the glowing embers for a maximum glowing
effect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as
colour pigments burn in during the heat-activated curing process.
Log Number
1
2
3
4
5
6
7
8
Studs
(Log #3)
A1
Lower Media Tray
(Logs #6, #7, and #8)
note:
Log numbers are located on the bottom or back of the logs.
Part Number
W135-0778
W135-0779
W135-0780
W135-0782
W135-0781
W135-0783
W135-0784
W135-0785
Burner Ports
A2
Description
Rear log
Right log
Left log
Left crossover log
Right crossover log
Left charcoal log
Center charcoal log
Right charcoal
Pilot Shield
Studs
(Log #2)
B1
B2
W415-4087 / 03.31.22
fi nishing
EN
17
Publicité
