Publicité
that will come in touch with food such as the container.
Never leave the appliance unattended while it is running.
Don't immerse appliance in water or liquids. In any case,
avoid splashing of water or liquids.
Put the appliance on stable shelves and floors.
Do not operate without coffee or with more than 100g of
coffee beans.
Never lift the lid when the grinding blades are still
running. Wait until the blades are completely still
before opening the lid.
To avoid the overheating of the motor, do not use the
equipment in continuous operation for more than 60
seconds; in that case, wait at least 3 minutes before
operating again.
Unplug power cord from electrical outlet after each use.
Rewind the power cord under the base of the main body.
Do not wrap around the motor body so to prevent any
damage to the cord.
DESCRIPTION (G20129)
1) Operation button
5) Motor housing
OPERATION
- Insert coffee in the container (3). Do not operate with more than 100 g of coffee beans.
- Connect the plug to the power outlet. Fit the lit (2) over the container (3).
- Mount the lit (8) over the container (7) and put in the slot of the motor housing (5).
This unit has 2 safety devices that prevents operation if the lid (2) and the container (7) are not
correctly inserted to ensure the maximum safety during use.
- Set the grinding thickness with the regulator (4).
- Operate the grinder by pressing the button (1). Do not exceed 60 seconds of continuous working.
- At the end of the grinding process remove the container (7) and use the coffee powder.
- Unplug the unit, wrap the power cord into the cable winder on the bottom of the unit.
This device is suitable to grind coffee beans for household use, to create your own favourite blend at home for
always having a fresh and fragrant coffee.
CLEANING -
Unplug the unit from the electrical outlet before cleaning.
The lid can be treated as normal ovenware. Rinse under the jet of tap water. Before assembling it back on the
motor housing, dry it completely. Remove with a soft brush the coffee residues in the container. Clean the
motor block with a damp cloth. Never immerse the unit and the motor block in water or other liquids for any
reason.
2) Lid
3) Container
6) Power Cord
7) Coffee powder container 8) Lid
4) Grinding regulation
9
Publicité
