Publicité
EN
Prior to use, please firstly connect controller, and then connect the
power plug. Touch the power switch lightly, the product starts working.
When stopping using it, please firstly turn off the controller and then
pull out the adapter plug from the outlet.
1. The specification of power adapter: input, AC110-240V, 50-60Hz;
output, DC 12V, 2000mA.
2. The product is Kneading massager. Pull through it, it is in standby
state. Users can realize the function through the hand controller.
3.
"Power" key: Soft on-off key. In the standby state, press the
start key, the power indicator lamp LED is normally on, press it again,
it enters the standby state.
4.
"Time" key: The default preset time of the product is 5-15
minutes，After it is used for 5-15 minutes, the product will shut down
automatically for protection.
5.
"Mode" key: Product setting A-B two direction selection,
press this button to switch the direction.
08
I. Precautions for safety maintenance
1. Precautions for safety maintenance are to prevent you and other
users from being damaged or hurt and guarantee safe use. Users
shall know this point.
2. Our company shall not bear any compensation liabilities for the loss
and damage caused to the user or the third party owing to improper
use of product or accessories or any compensation liabilities for the
loss and damage to the parts owing to intentional damage and (or)
crash.
3. Prior to use, please read the instructions carefully for operating
correctly. After reading, the users shall keep it well for reference at any
time.
4. Anyone during medical treatment can use the product after
obtaining the instruction of the doctor to avoid the occurrence of
accident or bad effect.
5. Children are forbidden to use or sit on the massage armchair for
playing, or else it may cause accident or hurt.
6. If you use the accessories bought from the accessory market rather
than that provided by the manufacturer to repair, replace the normal
rapid wear components and/or manual control circuit parts, it may
cause mismatching of manual control performance, and even failure of
normal operation. Our company shall not be responsible for it.
7. Our company does its utmost to guarantee the accuracy of product
operation manual. However, these printed files and texts may include
incorrect technology or printing error, Our company will not be
responsible for the appropriateness of the information and text, or the
error in these files and texts. We reserve the right of revising technical
parameters of the specification and installation figures.
8. If the massage armchair doesn't work or is observed to be
abnormal, please stop using it immediately and contact us.
09
Publicité
