Publicité
Installation (continued)
2
Securing the faucet assembly
NOTE: Make sure that the face marked with the arrow on
the flange (1) is facing forward.
□
From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (B). Push the FastMount™ system (B)
up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise)
to tighten (Fig 1).
Push
Sink
1
1
up
B
1
B
Push
2
B
up
3
Screw
B
Fig 1
3
Attaching the quick connector
to the receiving block
□
Push the quick connector (C) firmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
Sink
Sink
5
Please contact 1-855-HD-GLACIER for further assistance.
1
C
HOMEDEPOT.CA
Publicité
