Publicité
INSTALLATION AND CONNECTION
Remove the lower hinge and flip the hinge.
Attach the lower hinge on the other side. Loosen the adjustable feet and attach them on the
other side.
Detach the door gaskets and then attach them after rotating.
Fit the upper hinge on the opposite side with the screws and place the cover plates.
Check that the door is aligned horizontally and vertically and that the seals are closed on all
sides before finally tightening the bottom hinge. Level the appliance with the adjustable feet.
Move the door handle from the left side of the door to the right side.
EN 16
Publicité
