Publicité
Operating instructions
Compressor function:
1. Screw the air hose onto the compressor.
2. Connect the other side of the hose to the valve.
3. Switch the compressor on/off by pressing "
4. Press and hold N briefly to select the desired mode.
5. Hold the N longer to select the desired unit (PSI, BAR, KPA,KG/CM2).
6. Press " + " and " - " to set the correct pressure.
7. Press "
" to operate the compressor, the compressor automatically stops when the entered pressure
is reached.
Lighting function:
Press H to switch on the light (B), pressing H again can change the mode or switch off the light. The
compressor need to be switched on to activate the light.
USB charging function:
You can use the USB-A output (C) for the power bank function that allows you to charge various devices
with a maximum current of 500mA. The compressor does not need to be switched on to use this
function.
Charging integrated battery:
You can charge the product via the USB-C input (A) with the supplied cable
Battery indicator
Green: 70% - 100%
Yellow: 30% - 70%
Red: 5% - 30%
Flashing red: Under 5%
AC2400
" (M) for 3-4 seconds.
8
Publicité
