1.
General information about the installation
guide
These instructions are intended for trained specialised per-
sonnel. For this reason no basic working steps are included.
2.
Instructions
In cases where meters are expected to be exposed
to high air humidity, condensation or short-term
flooding, they must be of protection class IP 68.
The meter must be installed in compliance with
the requirements of EN 14151 and the EC Type
Examination Certificate!
The standards for drinking water installations (e.g.
DIN 1988) must be observed!
Medium: Water without additives
The IZAR@SET software is used for readout/parametri-
zation and is obtainable on the Internet at https://www.
diehl.com/metering/en/diehl-metering/support-center/
downloads
Radio
As supplied, wireless is switched off. It must be
manually activated with the control knob or by
the IZAR@SET software (CORONA ER) or HYDRO-SET
software (CORONA E / WESAN E).
- 22 -
Deutsch
English
Français