Publicité
VARIANT A Article No. S50.02.01000,
S50.02.01100, S50.02.01200
About these instructions
These instructions describe the mounting of the
electronically continuously adjustable HEWI S 50
WC module (picture 16 to 30) and the corresponding
prewall installation (picture 1 to 15). The following
variants and options (accessories) are described:
VARIANT A:
Flushing mechanism with button
VARIANT B:
Flushing mechanism sensor-controlled
OPTION C for both variants:
Connection option for washlet
OPTION D for both variants:
Connection option for HEWI support rail
• Mounting solely by authorised specialists.
• Use only original spare parts.
• Use only HEWI mounting materials.
Safety advice
Risk of injury from electric shock, connection to
230 V network must be carried out by an authorised
specialist.
Intended use
• Prewall installation for installation in drywalls
• Relevant processing guidelines of all trades
involved must be considered
• Mounting materials supplied are suitable for
concrete and solid sand-lime brick
• Additional mounting materials available from HEWI
• Only for commercially available wall-mounted WCs
with a depth of up to 700 mm
• Maximum load weight 400 kg
Disclaimer
HEWI does not accept any liability whatsoever for
personal injuries or damage to property that is or has
been caused due to incorrect assembly, installation
or use, especially due to disregard of the listed
warnings and safety instructions.
All manuals and user guides at all-guides.com
VARIANT B Article No. S50.02.02000,
S50.02.02100, S50.02.02200
Terms and symbols used
OKFFB Upper edge of finished floor
1
2
Order of mounting steps
A
B
Variant
1
2
Single steps within a
mounting step
Observe notes in separately enclosed
instructions, e.g. care tips.
Observe floor construction!
OKFFB
Keep all components dry
and dust-free!
Disposal
Proper disposal is subject to the applicable national
statutory regulations.
Warning and hazard notices
HEWI products are easy-care. Generally speaking,
an occasional wipe with a damp cloth is enough.
When using detergents, please observe
the following:
• Always unfold the floor support fully.
• The floor support must stand firmly on the floor.
• Improper mounting or use can lead to accidents
involving serious injuries.
• The maximum static load of the support rail is
not increased by using the floor support.
• In the event of damage, the floor support rail may
only continue to be used following inspection by a
specialist company responsible for maintenance.
For further information, please contact HEWI
Technical Support, tel. +44 1634 377688.
Read original instructions carefully before use
OPTION C
Components S 50 prewall installation
1
2a
2b
2c
3
4
5
6
7
8
9
10
11
To be provided on site:
• Floor drain dia. 90 or 110 mm at specified position
• 230 V power supply
• ½" flexible hose water connection to the flushing
Components S 50 module
12
13
14
15
16
17
18
19
20
To be provided on site: Wall-hung WC
Components OPTION D
21
22
To be provided on site: Support rails
Components OPTION E
23
Keep for future reference
OPTION D Article No. S50.02.000...
OPTION E Article No. S50.02.02001
OPTION C Connection option for washlet
Floor drain DN90
Side outlet DN90, right
Side outlet DN90, left
Mounting feet on wall
Protective drywall cover for flushing mechanism
Receiver, remote control
Remote control with separate
operating instructions
Prewall frame
Protective drywall cover for connections
Wall-hung WC fastening screws
Junction box, terminal block
Power pack and connection cable 12V
tank (allow for sufficient length for the entire travel
distance of the WC height adjustment)
VARIANT A: Flushing button
VARIANT B: Sensor button and servomotor
with separate operating instructions
Dust strip HPL mounting board
HPL mounting board
Profiles sealing strip
Plexiglas front top
Sticker HEWI logo
Flushing symbol
Plexiglas front bottom
U-bracket
Adapter plate
Radio receiver
HEWI | 3
Publicité
