Publicité
Assembly Steps
2. Install the front wheel.
3. Install the handlebar.
Remove the nut and washer on the
front axle.
As shown in the picture, fix the
washer, wheel, washer and nut onto
the axle in proper order.
Fasten the nut with spanner.
Install the handlebar and steering
column. put through the hole on
the top of the ride on body.
As shown in the picture,ensure
the end of the steering column
locates correctly into the front
axle.
Then push firmly down on to the
handlebar. and fasten with washer
and nut.
(PIC1,2)
Publicité
