Publicité
2.4 Changing the Light (optional)
Any replacement or maintenance of the LED lamps is intended to be made by
the manufacturer, its service agent or similar qualified person.
2.5 Starting to use
2.6 Energy saving tips
The appliance should be located in the coolest area of the room, away from
•
heat producing appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance.
•
Overloading the appliance forces the compressor to run longer. Foods that
freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in
•
the appliance. This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or
•
paper toweling. Liners interfere with cold air circulation, making the appliance
less efficient.
Organize and label food to reduce door openings and extended searches.
•
Remove as many items as needed at one time, and close the door as soon as
possible.
• Taking a tool (flat screwdriver or cone), insert it into the
gap at the arrow position in the figure and gently pry it
outward to open the flip.
• After opening, the freezer is as shown in the figure.
Next, take out the power line from the hole;
• After removing the power line, cover the cover plate
again.
The freezer shall stay for half an hour before connecting
power when it is firstly started.
The freezer shall run 2 to 3 hours before loading fresh or
frozen foods. The freezer shall run for more than 4 hours in
summer
in
advance
temperature is high.
considering
11
that
the
ambient
V.1
Publicité
