Manuels Connexes pour MAZIN FURNITURE 1962-1
Sommaire des Matières pour MAZIN FURNITURE 1962-1
- Page 1 Version 1.0 2 Personnes requis 1962-1/1962-3/1962K-1/1962K-3 Nash Queen Bed/King Bed Grand lit/Tres grand lit Nash...
- Page 2 HAVE A QUESTION? GIVE US A CALL. 1-800-363-0219 VOUS AVEZ UNE QUESTION? APPELEZ-NOUS AU 1-800-363-0219 Thank you for purchasing this product from Mazin Furniture. Please take the time to read and follow the instructions below. Check that you have all parts and hardware before assembly.
- Page 3 Parts list/Liste des pieces Centre Rail (P6)/Longeron central (P6) Headboard (P1)/Tête de lit (P1) 36 x End Connectors (P7) 36 x Connecteurs d’extrémité (P7) Footboard (P2)/Pied de lit (P2) 18 x Centre Connectors (P8) 18 x Connecteurs centraux (P8) 4 x Headboard and Footboard Legs (P3) 4 x pieds de tête et pieds de pied de lit (P3) 36 x Slats (P9)/36 x Lattes (P9) 2 x Support Leg (P4)
- Page 4 Hardware pack/Liste De Quincaillerie 6 x Screws 8 x Big Head Bolts 14 x Short Bolts 6 x vis 14 x Boulons courts 8 x gros boulons de tête (H2) (H3) (H1) 6 x Long Bolts Allen Key 20 x Washers 6 x boulons longs Clè...
- Page 5 Step 1a/étape 1a You will need / Vous aurez besoin 6 x Long Bolts 6 x Washers Allen Key 6 x Spring Washer 6 x boulons longs 6 x rondelles Clè allen 6 x rondelle à ressort (H4) (H5) (H6) (H8) (H6) (H4)
- Page 6 Step 1b/étape 1b You will need / Vous aurez besoin Phillips Head Screwdriver 4 x Screws 4 x vis (not provided) tournevis (H3) Phillips(non fourni) (H3) (P2) Attention: (P11) Small hole Large hole Petit trou Grand trou Do not screw hardware from this side. Screw hardware from this side.
- Page 7 Step 2/étape 2 You will need / Vous aurez besoin Allen Key 8 x Short Bolts 8 x Washers Clè allen 8 x Boulons courts 8 x rondelles (H6) (H2) (H5) (P3) (H5) (H2) (H6) (P11) (P3) (P1) (H5) (H2) (H6) (P2) Attach 4 x legs (P3) to the bottom of headboard (P1) and footboard leg support...
- Page 8 Step 3/étape 3 You will need / Vous aurez besoin Allen Key 8 x Big head Bolts Clè allen 8 x gros boulons de tête (H1) (H6) (P1) (P5) (P1) (H1) (H6) (P5) (P5) (P2) Install the 8 x big head bolts (H1) to the brackets of the headboard (P1) and footboard (P2) by using allen key (H6) as shown,do not tighten the bolts and keep them 8mm loose.
- Page 9 Step 4/étape 4 You will need / Vous aurez besoin 2 x Short Bolts Allen Key 2 x Washers 2 x boulons courts Clè allen 2 x rondelles (H2) (H6) (H5) (H6) (H2) (H5) (P6) (P4) Attach the support legs (P4) to the centre rail (P6) by using 2 x short bolts (H2) and 2 x washers (H5) as shown.
- Page 10 Step 5/étape 5 You will need / Vous aurez besoin 4 x Washers Allen Key 4 x Spring Washer 4 x Short Bolts 4 x Rondelles Clè allen 4 x rondelle à ressort 4 x boulons courts (H2) (H8) (H5) (H6) (H5) (H8)
- Page 11 Step 6/étape 6 You will need / Vous aurez besoin 36 x End Connectors 18 x Centre Connectors 36 x Slats 36 x Lattes 36 x Connecteurs d’extrémité 18 x Connecteurs centraux (P7) (P8) (P9) (P9) (P9) (P8) (P7) (P7) Attach 2 x end connectors (P7), 1 x centre connector (P8) and 2 x slats together as shown, repeat this for the remaining slats.
- Page 12 Sometimes it makes it easier to line up the hole if you press down in the middle of the slat to flatten it out. Parfois, il est plus facile d’aligner le trou si vous appuyez au milieu de la latte pour l’aplatir. Repeat for every bed slat until finished.
- Page 13 Step 7/étape 7 You will need / Vous aurez besoin 2 x Screws Allen Key 1 x Felt pad Phillips Head Screwdriver 2 x vis 1 x feutre Clè allen (not provided) tournevis Phillips (non fourni) (H3) (H6) (H7) Make sure screws are fully tightened.
- Page 14 Step 8/étape 8 Job complete!/Travail terminé! In the interest of our environment please dispose of all packaging thoughtfully. Dans l’intérêt de notre environnement, veuillez disposer De tous les emballages soigneusement. Page 14...