Publicité
Liens rapides
➀
Remove strike plate.
➄
Temporarily apply strike plate
and test for alignment with lock,
remove strike plate.
➁
Remove cover plates.
➅
‾ Remove VHB tape cover paper.
‾ Apply cover plates.
‾ Press firmly to ensure adhesion.
➂
Separate plates by
removing screws.
6" x 10" Center Lock Keeper Install
Code No.: 721PFCLKE62(XXX)|721PFCLK6(XXX)
➃
Assemble clamp plates onto glass.
Be sure to have nuts and washers to
the outside.
➆
Reattach strike plate.
* For glass 12mm (1/2")
Version – 10.30.23
Publicité
Manuels Connexes pour Richelieu 721PFCLKE62 Serie
Sommaire des Matières pour Richelieu 721PFCLKE62 Serie
- Page 1 6” x 10” Center Lock Keeper Install Code No.: 721PFCLKE62(XXX)|721PFCLK6(XXX) * For glass 12mm (1/2”) ➀ ➂ ➁ ➃ Separate plates by Assemble clamp plates onto glass. Remove strike plate. Remove cover plates. removing screws. Be sure to have nuts and washers to the outside.
- Page 2 Gâche de serrure centrale 6” x 10” Code No.: 721PFCLKE62(XXX)|721PFCLK6(XXX) * Pour verre de 12mm (1/2”) ➀ ➂ ➁ ➃ Assembler les pinces de fixation sur le Retirer la gâche. Retirer les plaques de Séparer les pinces en verre. Veiller à ce que les écrous et les recouvrement.
- Page 3 Gâche de serrure centrale 6” x 10” Center Lock Keeper Install Code No.: 721PFCLKE62(XXX)|721PFCLK6(XXX) Pour verre de 12mm (1/2”) |For glass 12mm (1/2”) Glass Template| Options|EN: Modèle de verre: • Entrance Glass Lock Keeper (721PKCLKE62XX): Accommodates for both deadlatch and dead bolt. •...