Publicité
Berlin
AVANT
Electrical isolation
Sealing rating
Impact resistance
Voltage
PRECAUTIONS:
• Disconnect current before installing device.
• Keep product out of the reach of children.
• Do not immerse this device in water or handle it with wet
hands.
• Do not use gloves or any plastic material.
• Be careful not to bang the device.
• Do not install the product in the presence of heat sources or
high concentration of moisture.
• Do not handle the product whilst it is in use and allow it to cool
down before hand contact.
• For storage, store the product in a dry place and protected from
bumps and moisture.
• Under no circumstances should the screen be covered with
thermal insulation material.
• If the device is faulty, replace immediately with a new one.
• A discharge on this light fixture may destroy or damage its
electrostatic sensitive components.
• Non-replaceable lamp.
1/8
13 marzo 2023
E
1x
2x
85
125
660mm (6 clips)
1270mm (8 clips)
1570mm (10 clips)
WARNING
CI
• Before installing this product, please read the instructions
IP65
carefully and store them in a safe place.
IK08
• The installation should be carried out by trained staff.
• Incorrect handling of the parts or the light fixture itself may
impair the proper performance of this product. In this case,
220-240V
the manufacturer guarantee shall be deemed void.
• The manufacturer guarantee shall be deemed void: if the ins-
tallation is not performed in accordance with the spanish low
voltage electrotechnical regulation 2002 (REBT 2002).
• The application of ITC BT09-4of rebt (installation of line and
light fixture surge protectors) is essential for industrial and
public lighting installations. The guarantee does not cover
against damages caused by surges in light fixtures without
surge protectors installed.
ATTENTION!!! OBSERVE PRECAUTIONS FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES.
Publicité
