Publicité
EN
Installation and usage
The 2-Port Bi-Directional HDMI 2.0 Switch allows you to easily switch
between two HDMI sources or display two devices on a single HDMI
display. No additional power is required. Simply press the button to select
the desired HDMI source, with a blue LED indicating which source is
active.
* Ensure all cables are securely connected and power off your HDMI
source devices and display before beginning installation.
* The HDMI switch does not support DVI-to-HDMI conversion. Please
confirm that the signal source and display are compatible.
Safety and warning instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
◼ Keep the device away from water, humidity, fire or hot environments.
◼ Keep your device and all its parts and accessories out of the reach of
small children.
◼ Do not leave the packaging material lying around carelessly. This may
become dangerous playing material for children.
◼ Avoid dropping, throwing or crushing the device.
◼ Do not open, change or damage the device.
◼ Disconnect the product from the mains before cleaning.
◼ Clean the product with a dry, fibre-free cloth.
Disposal of waste electrical equipment: Dispose of the
product at a recycling point. Do not dispose of together with
household waste. Incorrect storage/disposal can harm the
environment and/or cause injury.
CE / UKCA marking: Conceptronic declares that this
product complies with the directives listed in the
section 'Declaration of Conformity'.
Publicité
