Whirlpool ACM854 Manuel D'utilisation page 10

1. In order to avoid any accident/damage, it is strongly recommended to fix the power supply
unit in 3.5m away from the swimming pool by using the safety rope (included in the
package).
2. In order to prevent severe damage to the cleaner, never power on the unit when it is outside
of the swimming pool.
3. The power cord must be connected to an appropriate earthed socket.
4. Hold the top handle when putting the cleaner into water or lifting out of the water, do not
pull the cable. Before power on, make sure to empty the trapped air inside the cleaner (no
more air bubbles coming from the cleaner and the cleaner is fully submersed on the pool
bottom).
5. Before power on, make sure the filter be assembled in position and cable be fully released
to avoid any winding, which could affect the cleaner's performance or cause damage.
6. Please clean and wash the filter bag every time after use.
7. The cleaner should be stored in a cool and ventilated place, away from direct sunlight when
not in use.
8. The power supply unit should be placed in a shaded area during working. In order to avoid
overheating and potential damage of components, never cover the power supply unit.
9. Only authorized after sales service personnel should open the cleaner's power supply unit
and motor assembly, otherwise the warranty will be invalidated.
10. Do not use the cleaner beyond the working environment/conditions stated in this manual.
11. Make sure the PH of pool water is between 7.0-7.2.
12. This machine is for clean the pool only not for other purpose. Read carefully the user
manual before use.
Important Precautions
10