Publicité
Door reversal (Please contact Midea after sales team to help
you with this, do not change the door by yourself)
Based on the location where you plan to use your refrigerator, you may find it
more convenient to reverse the position of the door.
CAUTION
CAUTION: To avoid injury to yourself or your property, we recommend that
someone assist you during the door reversal process.
Preparing to reverse the door position
You will need: A standard screwdriver, a Phillips screwdriver, and the included Allen
wrench.
• Make sure that your refrigerator is unplugged and empty.
• Have someone available to assist you in the process.
• Keep all of the parts you remove to reuse them later.
Parts included with the hinge kit:
Parts already mounted on the door (as shipped):
Bottom hinge
Hole cap
Step
1. Unplug your refrigerator and remove all food from the door shelves.
2. Dismantle the screw hole caps, screws and handle, and remove the plastic screw
hole caps from the other side.
3. Dismantle the upper hinge cover, screws and upper hinge, and remove the hole
cover from the other side. Unplug the wiring connector on the right side of
refrigerator top .
ATTENTION
• Images show a refrigerator that opens on the left side. Your refrigerator may open on the
right side.
• If you need to change the door left and right, please contact professional after-sales
personnel.
Left top hinge
Left top hinge cover
Right top hinge
Door-open stopper
07
Right top hinge cover
EN
Publicité
