Publicité
Step 3
Make sure the holes on the panels line up and slide 2 fasteners (C), from the
outside of the panel, in the upper two holes and finger tighten with 2 nuts (E).
Then use a short bolt (D) to secure the two leg panels together with the head
of the bolt on the outside of the panel and the nut (E) on the inside. Repeat
with the other panels.
Step 4
Once the fourth panel is secured, place the first flange over the top of one
side of the fire pit insert as shown. Make sure not to install the bolts until all
four flanges are in place.
8 | www.bluesk youtdoorliving.com
Publicité
