Notes On Handling; Indications For Use - Hedue nivcomp Mode D'emploi

07

NOTES ON HANDLING

The selected lead edge on the reference level applies for all further measuring points.
Vertical alignment may be judged by eye.
For aligning in poor light:
In a dark or concealed position, hold displays using
holding:
LED flashing light:
Zero – regular flashing, too low – slow flashing, too high – rapid flashing.
08

INDICATIONS FOR USE

If the following indications are observed, nivcomp allows rapid and reliable level checking.
First check the position of the pressure spindle (see Item 5).
Taking additional measurements for checking based on the reference level
considerably improves measuring reliability.
3 m
AROUND
THE HOUSE
2 m
Inside
buildings
1 m
0 1
Illustration: Typical measurement reading scatter within hose radius as a function of thermal
conditions and relative measuring height. For this reason no standard deviation is given.
or after 40 s.
OVERCAST
WEATHER
Outside buildings
2 3
and then read off. To terminate
WIND
4 5 6
SUN
7 8 ± mm