Package Contents; English - i-tec MWBT245 Mode D'emploi

BlueTouch Ergonomic Bluetooth Mouse
INTRODUCTION
Thank you for buying i-tec BlueTouch 245 Ergonomic Bluetooth Mouse. It is a wireless,
optical mouse with Bluetooth 4.0 interface, allowing easy and accurate control of your
notebook, tablet or PC. Currently, Bluetooth adapters are integrated in most mobile
units, hence, external Bluetooth adapter, occupying USB port, is not necessary.
The mouse is powered by a single AA battery, which is included. We do not recommend
using recharging accumulators, since their voltage is lower and, consequently, their
correct function cannot be guaranteed.
You only need to "pair" the mouse with your unit and you can start using it immediately.
Operation range is up to 10 m.
Profiled shape of the mouse provides a better support of our hand, thus allowing more
comfortable use. And the mouse fits perfectly in our palm, thanks to perfect ergonomic
design.
Optical sensor allows using the mouse on almost any surface and, at the same time, it
offers higher speed, accuracy and reliability, compared with conventional mice. DPI
buttons for adjustment of resolution (sensitivity) allow modifying cursor speed in
compliance with your personal preferences.
The mouse is compatible with Windows 8/8.1/10 and Android. 6 buttons for easy
control. The functions of these buttons vary with individual operations systems.

PACKAGE CONTENTS:

• Bluetooth Optical Mouse
• 1x AA 1.5V battery
• User manual
INSTALLATION GUIDE:
Step 1: Installing the battery
• Whenever new battery is installed, make sure that the battery is undamaged.
• Remove the battery cover.
• Insert one AA battery into the battery compartment, make sure to properly orient
the positive and negative ends (+/-) as specified by the marks in the battery com-
partment. Replace the battery cover and make sure it is locked.
• Switch on the mouse, LED light will blink.
• Low-voltage alarming function: when the battery have been used for some time and
discover the LED light in „DPI-adjusting button" blinks automatically, which reminds
you that battery´s voltage is becoming low, suggested you replace the battery with
new one.
Step 2: Connecting the Bluetooth mouse
Before you install the Bluetooth mouse, please make sure that your computer supports
Bluetooth function, and finishes the Bluetooth software installation. Then press the
middle button (wheel) and the right button for 3 seconds at the same time. The lamp
on the mouse will light on to show the mouse is in the pairing mode now. Then please
follow the below procedures to install the mouse (It can slightly differs according to the
Bluetooth software):
• Make sure that the Bluetooth function has been activated. Double click the Blue-
tooth Icon on the Task Bar or in the Control Panel, click „Add a Bluetooth device".
• Select „My device is set up and ready to be found", click „Next".
• Select Bluetooth mouse, click „Next".
• In case the mouse requires pairing PIN code, enter „0000".
6 |

ENGLISH