Riccar SPIRIT PLUS Manuel Du Propriétaire page 10

MAINTENANCE AND CARE
SAFETY FIRST
UNPLUG VACUUM BEFORE PERFORMING
ANY MAINTENANCE ON YOUR VACUUM.
When to Change the Vacuum
Bag/Full Bag Indicator Light
The full bag indicator light is designed
to show when the bag is full or when
there is a clog in the vacuum.
The system measures airflow
and alerts the user when airflow
is significantly reduced – most
commonly from full bags and clogs.
Fine powders such as flour, drywall
dust and ashes, can block bag pores,
causing the light to illuminate. The
vacuum bag should be changed.
The light could also come on during
attachment cleaning.
NOTE: The vacuum bags are disposable and intended to only be used once.
Replacing The Vacuum Bag
01
Open the bag
compartment lid.
10
02
Grasp bag holder and
pull the used bag off
the bag holder. Attach
the new bag onto the
bag holder.
Watch videos on
basic maintenance
03
Tuck the bag corners
into the vacuum
before replacing the
bag compartment lid.