CAPTELEC C 2450 Mode D'emploi page 10

C 2450 / AG005B
Warning: Please read this instruction manual carefully before using the instrument and keep it for future use.
A. SAFETY INSTRUCTIONS
1. The device is intended exclusively for private and not for commercial use. Only use this device as describe in this
instruction manual.
2. Do not handle the unit or plug with wet hands.
3. Never try to repair it by yourself. It must be repaired by the manufacturer or its service agent or a similarly
qualified person in order to avoid an electric shock.
4. Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
5. Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
6. This unit is not designed to be operated by means of an external timer or a separate remote control system.
B. REMARKS
Allow the item work continuously for best results.
₋
Do not immerse in water.
₋
Do not cover or block the motion detector.
₋
Keep the solar panel clean.
₋
If you are not using the unit for a long period of time, remove the batteries.
₋
C. HOW TO USE IT
1) Insert or replace batteries
- Open the battery compartiment's lid.
- Insert 4 rechargeable AA 1.2V batteries observing the correct
polarity indicated.
- Close the lid.
2) Settings
There has 3 button to adjust:
- round switch: to adjust ultrasonic wave sensitivity
- 2 steps switch 1: ON/OFF mode
- 2 steps switch 2 : 2 kinds of ultrasonic wave range can be selected
First: 20-55Khz Ⅰ：45KHZ 25KHZ 55KHZ 30KHZ 40KHZ 20KHZ 50KHZ 35KHZ
Second: 13-60Khz Ⅱ：A: 13KHZ 15KHZ 17KHZ 19KHZ 21KHZ 30KHZ
B: 14KHZ 17KHZ 20KHZ 23KHZ 26KHZ 40KHZ
C: 15KHZ 19KHZ 23KHZ 27KHZ 31KHZ 50KHZ
D: 16KHZ 21KHZ 26KHZ 31KHZ 36KHZ 60KHZ
Working mode:
Day mode
LED flashing
✘
Ultrasonic Wave
✔
All manuals and user guides at all-guides.com
ULTRASONIC AND FLASH ANIMAL REPELLER
Night mode
✔
✔
EN