Enlite EN-ANT1240BMS Installation

1 2
5A
Live - Brown (L)
Neutral - Blue (N)
e For termination only
6
Align and push
down to
replace
EN-ANT1240BMS, EN-ANT1558BMS & EN-ANT1869BMS
DETECTION AREA
Detection area can be reduced by selecting the combination on
the DIP switches to fit precisely each application.
1 2
7
x2
3
Squeeze ends
together to
release
HOLD TIME
Refers to the time period the lamp remains at 100% illumination
after no motion detected.
3 4
100%
75%
50%
10%
8
4
DAYLIGHT SENSOR
The sensor can be set to only allow the lamp to illuminate
below a defined ambient brightness threshold.
When set to Disable mode, the daylight sensor will switch
on the lamp when motion is detected regardless of ambient
light level.
50lux: twilight operation, 10lux, 2lux: darkness operation only.
5s
90s
5min
15min
9
Anti-Tamper
Screws
Document Version EN-ANT1240MS_&_EN-ANT1558MS_&_EN-ANT1869MS_V1_17
Enlite
Tel: 01727 836611
Fax: 01727 836622
Website: www.enlitelighting.com
Email: sales@enlitelighting.com
5 6
Disable
50Lux
10Lux
2Lux