INVENTOR SK-34BD Manuel D'utilisateur page 15

9. MAINTENANCE & CLEANING
• While cleaning, you may lightly rinse the interior with water and dry
• Allow the appliance to dry for
approximately 1 to 2 hours.
• Plug into a power source. The
appliance will chill continuously until
set temperature has been reached.
• Be sure to regularly clean the drain
hole to ensure proper drainage.
EN
• Do not use abrasive products, abrasive cleaning pads,
solvents or metal objects. Do not use water spray and
steam to clean the appliance.
• Do not use extreme moist cleaning pads. Any moisture
around the electric components, should be avoided.
• The use of a steam cleaner is prohibited, as this may
be very dangerous.
Prior to cleaning the appliance, un-plug from
the wall power socket, and remove all shelves.
• Clean the appliance with a moist soft cloth.
Use only neutral detergents.
• Clean the unit's interior with a weak
bicarbonate soda solution and rinse with warm
water applying a damp sponge or cloth.
• Use a damp cloth to clean the exterior, keep
in mind the door must be shut to avoid getting
any polish on the magnetic door seal or the
interior of the unit.
• Make sure not to let any water spill on the
control elements of the door.
• Be certain that there is no water spilling on
the control elements of the door
Clean the
interior of
the appliance
ONCE A
MONTH
15