Publicité
Liens rapides
Publicité
Manuels Connexes pour Little Seeds Haven 4540837COMS
Sommaire des Matières pour Little Seeds Haven 4540837COMS
- Page 1 B344540837COMS00SW inside for Assembly Manual 122023SW Check us out!
- Page 2 4540837COMS Haven 6 Drawer Dresser Navy Blue Keep this Assembly Manual for future reference Two Adults recommended for assembly This product is not intended for commercial use Do NOT return this product! For missing or broken parts - Call 1-800-489-3351...
- Page 3 Do NOT return this product! Call us! 1-800-489-3351 Monday-Friday limited warranty valid in the U.S and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 60 MIN - Compression dowels are tapped in with a hammer - Make sure to always face the point on the top of the Cam Lock towards the outer edge - Use all the nails provided for the back panel and spread them out equally - Back Panel must be used to make sure your unit is sturdy...
- Page 4 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer to do so may result in stripping the screw, This Cam Lock Fastening System will be used throughout the assembly process.
- Page 5 Before You Start Please Note: You may need to lightly tap the wood dowels with a hammer into the holes during your assembly process. Insert wood dowel completely into the hole. Not Actual Size Wood Dowel Actual Size Wood Dowel will extend out approximately 3/8”.
- Page 6 Board Not actual size T4540837S010SW T4540837S020SW T4540837S030SW TOP PANEL BOTTOM PANEL LEFT SIDE PANEL T4540837S040SW T4540837S050SW T4540837S060SW RIGHT SIDE PANEL PARTITION TOP RAIL T4540837S070SW T4540837S080SW T4540837S090SW BRACE RAIL LEFT DRAWER FACE RIGHT DRAWER FACE...
- Page 7 Board Not actual size T4540837S110SW T4540837S100SW T4540837S120SW LEFT DRAWER SIDE (RIGHT) LEFT DRAWER SIDE (LEFT) RIGHT DRAWER SIDE (LEFT) T4540837S130SW T4540837S140SW T4540837S150SW RIGHT DRAWER SIDE (RIGHT) DRAWER BACK DRAWER BOTTOM T4540837S160SW T4540837S170SW T4540837S180SW DRAWER SUPPORT BACK PANEL SUPPORT LEG...
- Page 8 Hardware Bag Reference Number: 24540837COMS0SW Part List Actual Size For any replacement hardware, order using part #24540837COMS0SW TSW0001 TSW0002 Cam Bolt Cam Lock 15-10 TSW0004 TSW0007 DOWEL SCREW TSW3006 TSW0008 M8 X 30 CBS 3.5 x 14 HANDLE SCREW SCREW CBS 4 x 38 TSW0015 NAIL...
- Page 9 Hardware Bag Reference Number: 24540837COMS0SW Part List Not Actual Size x6 SETS x1 SET TSW1004 TSW3001 TSW2004 DRAWER SLIDE HANDLE ANTI TIPPING KIT 350 MM...
- Page 10 Step 1 Insert cam bolts (A) x 8, cam locks (B) x 4 and wood dowels (C) x 4 to the side panel (3) and side panel (4). li leseedskids.com...
- Page 11 Step 2 Insert cam locks (B) x 4 and wood dowels (C) x 4 to the partition (5). li leseedskids.com...
- Page 12 Step 3 Attach drawer slides (J) CR x 3 to left side Attach drawer slides (J) CL x 3 to left side panel (4), use screws (D) x 9 to tighten. panel (3), use screws (D) x 9 to tighten. Slide (CL), scre Slide (CR), scre li leseedskids.com...
- Page 13 Step 4 Attach drawer slides (J) CR x 3 to partition (5), use screws (D) x 9 to tighten. Turn over the partition (5), then attach drawer slides (J) CL x 3, use screws (D) x 9 to tighten. “Left Face” “Right Face”...
- Page 14 Step 5 Insert cam bolt (A) x 1 and cam locks (B) x 2 to brace rail (7). Insert wood dowels (C) x 3 to top rail (6). Insert cam bolts(A) x 6 to top panel (1). Attach anti tipping kit (I) to top panel (1) and use (Ic) to tighten.
- Page 15 Step 6 Attach top rail (6) to top panel (1). Use screws (E) x 4 to tighten. Important!, Please make sure bigger hole facing up side. li leseedskids.com...
- Page 16 Step 7 Insert cam locks (B) x 4 and wood dowels (C) x 4 to bottom panel (2). * raw edges are shaded li leseedskids.com...
- Page 17 Step 8 Attach bottom panel (2) to partition (5). Use screws (E) x 2 to tighten. Pro Tip : Second person is recomended for ease of assembly on this step * raw edges are shaded li leseedskids.com...
- Page 18 Step 9 Attach right side panel (4) to bottom panel (2). Tighten the cam locks clockwise. Pro Tip : Second person is recomended for ease of assembly on this step * raw edges are shaded li leseedskids.com...
- Page 19 Step 10 Attach brace rails (7) x 2 to right side panel (4) and partition (5). Tighten the cam locks clockwise. Pro Tip : Second person is recomended for ease of assembly on this step * raw edges are shaded li leseedskids.com...
- Page 20 Step 11 Attach left side panel (3) to bottom panel (2) and brace rail (7). Tighten the cam locks clockwise. Pro Tip : Second person is recomended for ease of assembly on this step * raw edges are shaded li leseedskids.com...
- Page 21 Step 12 With a assistance of second person, carefully turn up right the unit. Attach top panel (1) to left side panel (3), partition (5) and right side panel (4). Tighten the cam locks clockwise. TOP RAIL Pro Tip : Second person is recomended for ease of assembly on this step * raw edges are shaded...
- Page 22 Step 13 IMPORTANT ! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. With the assistance of a second person, carefully lay the unit face down. Attach back panel (17) with nails (G) x 20. Distance from corner must be equal. Insert support leg (18) to bottom panel (2).
- Page 23 Step 14 Insert cam bolts (A) x 5 to left drawer faces (8) and right drawer faces (9). * raw edges are shaded...
- Page 24 Step 15 Insert cam locks (B) x 2 to panel (11), panels (12), panels (10) and panels (13). Insert cam lock (B) x 1 to panels (16). * raw edges are shaded...
- Page 25 Step 16 Attach panel (10), panel (11) and panel (16) to panel (8). Tighten the cam locks clockwise. Attach panel (12), panel (13) and panel (16) to panel (9). Tighten the cam locks clockwise. Pro Tip : Second person is recomended for ease of assembly on this step * raw edges are shaded leseedskids.com...
- Page 26 Step 17 Attach panel (15) into the groove of drawer (8) and drawer (9) as illustrated x3. Pro Tip : Second person is recomended for ease of assembly on this step * raw edges are shaded leseedskids.com...
- Page 27 Step 18 Line up the groove of panel (14) with panel (15), secure panel using screws (E) x 5 as illustrated x6. Pro Tip : Second person is recomended for ease of assembly on this step * raw edges are shaded leseedskids.com...
- Page 28 Step 19 x3 SETS Attach drawer slides (J) DL to panel (10), and use screws (E) x 3 to tighten as illustrated x3. Attach drawer slides (J) DR to panel (11),and use screws (E) x 3 to tighten as illustrated x3. Use these holes : Use these holes : (DL)
- Page 29 Step 20 x3 SETS Attach drawer slides (J) DL to panel (12), use screws (E) x 3 to tighten as illustrated x3. Attach drawer slides (J) DR to panel (13), use screws (E) x 3 to tighten as illustrated x3. Use these holes : Use these holes : (DL)
- Page 30 Step 21 Attach handle (I) onto panel (8) and panel (9), secure the handle with screws (G) x 2 as illustrated x6. * raw edges are shaded leseedskids.com...
- Page 31 Step 22 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Page 32 Step 23 Carefully insert drawers into the unit as illustrated. * raw edges are shaded litt leseedskids.com...
- Page 33 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 75 lbs. 34 kg 25 lbs. 11 kg each drawer Warning: Risk of serious injury to person - do not place a television on this furniture. This furniture is not approved for use with a television.
- Page 34 Register your product to receive the following: * New trend details -sneak peek on what's new * Surveys -have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit l i l l e s e e d s k i d s .
- Page 35 No Regrese este producto! Para piezas perdidas o rotas. Visitar: littleseedskids.com Llamenos al: 1-800-489-3351 (Gratis) Seguir little seeds en tilizarlo para evitar levantar y moverlo menos - Identificar, ordenar y contar las piezas antes de intentar ensamblar - Las clavijas de compresión se golpean con un martillo - Las diapositivas están marcadas con una R (derecha) y L (izquierda) para la colocación correcta...
- Page 36 Español Página 24 Para mampostería, hormigón u otros materiales de pared: Consulte en su ferretería local los anclajes apropiados para sujetar de forma segura el soporte de seguridad. IMPORTANTE: ESTA UNIDAD DEBE ESTAR SEGURA EN LA PARED PARA AYUDAR A PREVENIR AL TIPOVER. SIGA ESTAS INSTRUCCIONES PARA INSTALAR EL SOPORTE DE SEGURIDAD ANTIDISCIPLINADOR PROPORCIONADO CON ESTE PRODUCTO.
- Page 37 Español Página 28 Registre su producto para recibir lo siguiente: * Nuevos detalles sobre las tendencias - Sneek echa un vistazo a lo nuevo * Encuestas - tener una voz dentro de nuestra comunidad * Ofertas exclusivas y códigos de descuento Servicio de piezas de repuesto rápido y fácil Para registrar su producto, visite Ameriwoodhome.com 5 estrellas...
- Page 38 Français Capot Avant Regardez à l’intérieur du manuel d’assemblage Búsquenos! Page 2 Gardez ce manuel d’assemblage pour référence ultérieure. Deux adultes sont recommandés pour l’assemblage. Ce produit n’est pas dest né à un usage commercial. Non Retournez ce produit! Pour les pièces perdues ou cassées. Visiter: littleseedskids.com Appelez-nous: 1-800-489-3351 (sans frais) Suivre les petites graines sur...
- Page 39 Français page 25 Pour la maçonnerie, le béton ou d’autres matériaux muraux: Consultez votre quincaillier local pour obtenir les ancrages appropriés af n de f xer solidement le support de sécurité. IMPORTANT: CET APPAREIL DOIT ÊTRE SÉCURISÉ AU MUR POUR AIDER À PRÉVENIR TIPOVER. SUIVEZ CES INSTRUCTIONS POUR INSTALLER LE SUPPORT DE SÉCURITÉ...
- Page 40 Français Page 28 Enregistrez votre produit pour recevoir les éléments suivants: * De nouveaux détails sur les tendances - Sneek vérif er la nouvelle * Sondages - ont une voix dans notre communauté t on Service de pièces de rechange rapide et facile Pour enregistrer votre produit, visitez Ameriwoodhome.com 5 étoiles Visitez le site Web de votre distributeur local, classez votre produit acheté...