Internal Light
This refrigerator is equipped with side internal lights that are lit Deep Blue. Because the unit comes
with a glass door, the inside will be seen whether the door is open or closed.
You can choose to display the internal light in two different modes: Display Mode and Automatic
Mode by pressing and holding the Interior Light button for 3 seconds.
Automatic Mode
The internal lights will illuminate each time the door is opened and fade off after the door is closed.
This is the default lighting mode. This feature is triggered by a sensor located on the front vent that
recognizes when the door is open or closed.
Display Mode
The internal lights will remain illuminated whether the door is open or closed. This is a user-enabled
lighting mode and will use more energy.
Door Open Alarm
After 3 minutes of the door being open an alarm will sound and the display will flash with 00.
Sabbath Mode
Sabbath mode disables system responses to user-initiated activities and all external functions,
including lighting, display and audible alarms. The unit will still maintain internal temperatures and
set points.
To enable or disable Sabbath mode, Press the Power Button and simultaneously press the Increase
Temperature Button twice. The interior light and control display will go dark until the user disables
Sabbath mode.
NOTE: Although the display will not be visible, the temperature settings will remain active and
preserve the internal temperature. Sabbath mode will remain active until it is disabled by the
user.
BBV15C01AG Use, Care, and Installation Guide
Operating Your Appliance
21