UBERHAUS DESIGN L-GZ222PCO-5 Instructions De Montage page 3

Hardware Pack 1
AA
BB
CC
DD
W
Fig.1: Fit the Base protector (M) onto the Post (K), connect the Post base (L) and post (K) by using
bolt (AA) and flat washer (BB). Repeat for each base.
Fig.2: Insert the short panel 1 (A1) into the short panel 2 (A2), fix them by using bolt (CC) and flat
washer (BB). Fix the Mid top bar connector 2 (G2) on the middle of the A1 & A2. (Connect the long
panels (B1 & B2) and mid top bar connector 1 (G1) in the same way.)
Fig.3: Connect the assembled panels and the post (K) by using bolt (DD) and flat washer (BB).
1/4"-20*0.6 Bolt
1/4" F
lat Washer
1/4"-20*0.6 H
ex Bolt
1/4"-20*0.75 H
ex Bolt
1/4"-20 Wrench
36 PCS
72 PCS
20 PCS
16 PCS
1 PC