Millen-I-Air EH1509 Mode D'emploi page 4

Before cleaning, turn the appliance off, and disconnect from the mains supply.
The appliance may then be cleaned using a damp cloth with a drop of washing-up
liquid to remove any dust or dirt from the case. Do no use stronger detergents or
solvents as these may damage the paint finish.
Using a dry 1" (25 mm) paint-brush, remove any dust from the grilles.
If the mains lead is damaged, it must be replaced by the manufacturer or and
authorised service centre.
Dimensions:
Weight:
Power supply:
Power consumption:
Air flow
Operating current:
Air speed:
Noise (max.):
Service value:
MAINTENANCE
If the mains plug needs to be replaced, proceed as
follows:
Connect the brown wire to the terminal labelled "L".
•
Connect the blue wire to the terminal labelled "N".
•
Make sure that the cord-grip is positioned correctly
•
(over the outer sheath of the cable) and it fully tightened.
If the plug is fitted with a 13 A or 5 A fuse, replace
•
it by a 3 A fuse.
TECHNICAL SPECIFICATION
Page 4
570×280×510 mm
4.05 kg
230V
75 W (max)
3
4710 m /h (max)
0.32 A (max)
4.0 m/s
67 dBA
3
1.04 m /W.min