Product Description; Designated Use; Technical Data; Noise Emission Values - erba 33625 Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 - Nozzle
2 - Heatprotector (removable)
3 - Air intake
4 - On/Off switch & temperature gauge
5 - Focus nozzle

3. DESIGNATED USE

The heat gun is intended for applications such as: heating and welding of suitable materials (thermoplastic mate-
rials), surface drying, heat shrink tubing, soldering copperparts, thawing of frozen water pipes, removing paint or
glue. Any other use is prohbited. The buyer accepts all liabilities, legal and otherwise, for any damage or injury
resulting from improper use of the product (i.e. any other use than the above stated designated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

Rated power:
Air comsumption:
Power connection:
Temperature range:
Protection class:
Weight:

6. NOISE EMISSION VALUES

See technical data.

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

Check the voltage on the type sticker of the machine. The voltage of your power supply must not
deviate more than 10% from the indicated voltage.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
6 - Scraper nozzle
7 - Nozzle for working with pipes
8 - Broad nozzle
9 - Scraper
Page 11
1000 W (I) / 2000 W (II)
300l/min (I) / 500l/min (II)
230V ~50Hz
350°C (I) / 550°C (II)
II / IP20
Instruction manual
Issue: 12/2017
Changes, print, punctuation and other errors reserved!
1,6 kg
33625