Publicité
2 x Chairs
2 x Chaises
D
A
Notice:
EN
1. 50% tighten before all screws are in place. Allen wrench is
recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains
stable. Tighten up all screws with tools gradually.
3. If the screws are not aligned with holes during assembly, please
loosen all the other screws to 50% and continue the assembly
process.
4. If the item is not stable, please loosen all the screws, adjust it on a
flat ground and tighten up all screws again.
5. If one or some screws are fully tightened during assembly, the
others may not be aligned with the holes, resulting in assembly
failure. In addition, all the holes are designed to be relatively larger to
provide more space for the adjustment of the screws.
B
C
03
Publicité
