Charging The Battery - Ecom Ex-PMR 2000 Notice D'utilisation

8.2.3 Charging the battery

If the LED display on the unit illuminates red and three warning tones sound
every 30 seconds after the battery has been inserted, it means that the battery
charge is low. It is recommended to use battery chargers approved and provided
by ecom. The LED display on the battery charger indicates the charging
status.
LED display on the charger
Red
Green
1. Insert the charger adapter into the socket.
2. Insert the charger adapter into the socket of the charger cradle.
3. Insert the battery with or without the radio unit into the charger cradle.
4. The LED display of the charger cradle illuminates red when charging
begins and during the charging procedure. Make sure that the battery has
been inserted correctly into the charger cradle and that the battery contacts
are in connection with the contacts in the charger cradle.
5. The LED display illuminates green when the battery has been completely
charged after approximately three (3) hours.
6. You can now remove the radio unit or the battery from the charger cradle.
26
Status
charging
fully charged