Zendure SuperCharged AIO 2400 Manuel D'utilisation page 12

6.2 Confirming where to install your AIO 2400
Position your AIO 2400 on a hard, level floor.
Wear safety glasses and gloves when drilling holes.
!
Tool list
NO. Picture Name
1 Phillips Screwdriver
2 AIO 2400 Bracket Combination Set × 1
4 Machine screws M5*8 × 9
STEP 1
Use three M5*8 machine screws to
install the floor-standing L-shaped
[component] onto the floor stand.
STEP 2
Mount the AIO 2400 to the bottom
bracket assembly.
Part of a basic set / Optional (not included)
STEP 3
Based on your Microinverter,
select the appropriate height
and then use six M5*8 machine
screws to install the U-shaped
bracket onto the back of the
AIO 2400.
EN
9