Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
MODEL DC7210A
Refer to drawing 10039559 at the end of this section for dimensions and connector locations.
Operation of the Model DC7210A is quite simple. The input signal is fed into the 7-16 male connector (J1)
marked INPUT and the output is taken from the 7-16 female connector (J2) marked OUTPUT.
Forward coupled output is taken from the jack (J3) marked FWD, and Reverse coupled output is taken from
the jack (J4) marked REV. Both coupled output jacks on the unit are Type N female.
See Specification Sheet for detailed specification.
Rev -
Do not exceed maximum power ratings. Do not drop. Internal
components are fragile.
WARNING:
1
Publicité
