Manual - DMX24
DMX decoder mode
DMX decode start address: 001~512
DMX decode mode:
•
DIM (1CH single color) 8 outputs
•
CCT (2CH color temperature) 16 outputs
•
RGB (3CH) 24 outputs
See address setting table at the end.
Output PWM frequency:
Std
Standard (2KHz)
High
High (8KHz)
Mid
Medium (500Hz)
Supr
Super (16KHz)
Higher PWM frequency, will cause lower output current, higher power noise, but more suitable for came-
ra(No flickers for video).
Grey level:
8bit
16bit (choose only if the DMX-console supports 16 bit)
Output dimming curve (Only usable with 8 bit grey level)
Standard: Gamma 1.6
Linear: Gamma 1
Gamma: 0.1-9.9 (long press < or > key to change 0.1-9.9)
DMX master mode as 24 channel dimmer
Each channel brightness setting: Range: 0-255 (0-100%)
<<&>>: press < or > key to switch between previous or next page, each page 3 channel.
DMX master mode as RGB controller
Dynamic RGB mode: 10 programs
Mode speed: 1-10 speeds, Level 10 highest speed