EKSA EK3000 Manuel D'utilisation page 8

4. Press the "FN + Q/W/E" to switch between the three Bluetooth devices you have paired successfully with the keyboard.
• Type-C Wired Mode
1. Slide the connection-mode switch to enable "Wired Mode". The keyboard is turned off by default when switching from a wireless mode
to a wired one.
2. Connect the keyboard to the USB port of your device via the USB Type C to Type A cable.
• When you turn on the keyboard again, it will automatically connect to the last paired device. To
switch devices, press the key corresponding to the profile number of the target device.
6