Price Pfister Cadenza 26 Serie Mode D'emploi page 5

15
15A
15D
15B
HOT
15C
15 WATER SUPPLY CONNECTIONS
Gently separate hot and cold Supply Tubes (15A), approximately three inches
apart. Connect water Supply Lines (15C) to Faucet Inlets (15B). Hot water
supply line goes to hot inlet fitting indicated by red tag (15D). (Supply lines not
included). Follow manufacturer's instructions when installing supply lines.
16
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the
sink.
Note: After installation is complete, flush faucet (see step 21).
FAUCET FUNCTIONS
17
17 SPOUT FUNCTION
Spout (17A) can be rotated around the Faucet Body in any direction.
15A
15B
COLD
15C
17A
ENGLISH
18
ON
18A
18 VALVE FUNCTION
By lifting Lever Handle (18A) up, the valve will be activated allowing water to
flow. The water flow will increase by continuing to lift up Lever Handle (18A).
By rotating Lever Handle (18A) counterclockwise, the water temperature will
decreased to fully cold. By rotating Lever Handle (18A) clockwise, the water
temperature will increased to fully hot.
19
19 SIDE SPRAY OPERATION
Side Spray (19A) can be pulled out to spray water in any direction. To activate
the Side Spray (19A), press Toggle Button (19B) located on the back of Side
Spray (19A).
20
20 SOAP DISPENSER OPERATION
To activate Soap Dispenser (20A), press Dispenser Head (20B) to dispense
liquid soap.
5
HOT COLD
18A
19B
19A
20B
20A