Star S07UF06C Instructions D'installation page 2

Empty carbon, distributor tube and gravel into a disposable
container and wash all parts clean. Discard the old dis-
tributor tube.
Reassemble unit by centering new distributor tube (includ-
ed in mineral package 136227) in tank and cover top end
of tube with masking tape to prevent gravel and carbon
from entering the tube. Using mineral package 136227,
pour in gravel and then the carbon, keeping the distributor
Original Installation Date
REPAIR PARTS
PART
NO.
NO.
1 136237 Union 3/8" compression x 3/8" compression (Figure 1)
2 136236 Tube/poly 3/8" O.D. x 2 ft. (Figure 1)
3 136235 Union 3/4" N.P.T. x 3/8" compression (Figure 1)
4 020088 Manifold (Figure 1)
5 136950 Distributor (Figure 1)
6 136232 Mineral tank/base (6 x 18) (Figure 1)
136227 Carbon refill kit (Figure 1)
127737 Ferrule/plastic 3/8" (Figure 2)
131120 Insert/tube (Figure 2)
7
023053 Tube Assy. (Figure 2)
CARBON REPLACEMENT RECORD
Replacement Date Replacement Date
Installation Illustration Figure 1
DESCRIPTION
tube centered in the tank opening. Remove cover from
distributor tube and reinstall the distributor head.
The filter may now be reinstalled under the sink following
the installation instructions. Refer to start up instructions
before using the filter. NOTE: Record date carbon was
replaced for future reference.
Replacement Date
Union ➀
Cold
Water
Line
Hot Water Line
Poly Tubing ➁
Union ➀
Cold Water
Line
Shut-Off Valve
Figure 2 Feed tube supplied
with unit
Union
Ferrule (use plastic
for plastic tubing or
brass for copper
tubing
Brass compression nut
Copper or plastic tubing
coming from home or
going to cold water faucet
2
Replacement Date
Poly Tubing ➁
➂
➂
Manifold
➃
Distributor
Tank
Tube ➄
➅
Activated
Carbon
Gravel
Tube Assy. (7)
Install this end of
both tubes to inlet
and outlet of carbon
unit as shown. Do
not add white plastic
ferrules or anything
else to this end.
Tube insert