Télécharger Imprimer la page

CANARMNA harmonizedhome HO-01-01S Guide Rapide

Luminaire mural extérieur

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

OUTDOOR WALL LIGHT
!
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
4. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER
OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
5. TO CLEAN THE FIXTURE, TURN OFF THE POWER. WAIT FOR IT TO COOL. WIPE THE OUTSIDE SURFACE OF FIXTURE WITH
A CLEAN, DRY AND SOFT CLOTH. NO SERVICE PART IS REQUIRED INSIDE THE FIXTURE.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION STEPS:
1. Attach mounting plate to the Junction box with two mounting
screws.
2. Use the slide switch to choose a color temperature. The
options are 3000K, 4000K and 5000K.
3. Connect the ground wires (bare copper or green) from your
fixture to the ground wire (bare copper or green) or ground screw in
the electrical box. Attach the black wire from the light fixture to the
black wire in the electrical box. Attach the white wire from the light
fixture to the white wire in the electrical box.
4. Once the wires are connected, ensure to push back all the wire
nuts into the Junction box.
5. Place the fixture over the mounting plate, align the two mounting screw holes on
the plate with the two screw holes on the fixture, and secure the bracket with bracket
screw.
6. After installation, seal around the top and side perimeter between the fixture and
the wall surface with weather resistant caulk. The bottom should be left un-
caulked to prevent moisture build-up. Apply a small amount of weather resistant
caulk around the side perimeter between the screw head and mounting plate.
Compatible wall dimmers : Leviton # 742-66EV-P0W, 742-6672-HLW, 722-6674-PDW, Lutron # SCL-153PH-WH
Max # of Lamps per 150W Dimmer: 15 pcs
Imported By: 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
Phillips
Wire Cutters
Screwdriver
Pliers
mounting plate
mounting
screw
black
white
ground
bracket
screw
Weather Resistant
Caulk
(not included)
12/23
LOL674
Wiring supplies
as required by
local electrical
code
Wrench
CCT switch
3000K 4000K 5000K

Publicité

loading

Sommaire des Matières pour CANARMNA harmonizedhome HO-01-01S

  • Page 1 12/23 LOL674 OUTDOOR WALL LIGHT TOOLS AND MATERIALS REQUIRED: INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS IMPORTANT SAFETY Wiring supplies Phillips Wire Cutters as required by INSTRUCTIONS Screwdriver local electrical SAVE THESE INSTRUCTIONS code Pliers Wrench SAFETY PRECAUTIONS:...
  • Page 2 12/23 LOL674 Luminaire mural extérieur OUTILS ET MATERIAUX REQUIS: INFORMATION CONCERNANT LES RISQUES D'INCENDIE ET DE BLESSURES CORPORELLES LIRE TOUTES LES INSTRUCTIONS Fournitures INSTRUCTIONS IMPORTANTES Tournevis Coupeur électriques telles Philips de Fils que prescrites par DE SÉCURITÉ les normes locales GARDER CES INSTRUCTIONS Pinces Clef...