Publicité
STEP 2.2
- Turn base frame (G) upside down and
attach it to the bottom side of back weight
panel (C), using 2 pcs allenbolt 1 1/4"
(30 mm) (M) and spring washer (W),
as shown in FIG.2.2.1.
- Attach base frame (G) to the side panel cleat,
using 4 pcs allenbolt 1 1/4"(30 mm) (M) and
spring washer (W), as shown in FIG.2.2.2.
- Tighten all bolts with allenkey (N).
STEP 2.1
- Attach leg (D) to base frame (G),
using allenbolt 1 3/8"(35 mm) (L) and
spring washer (W), as shown in FIG.2.1.
- Tighten all bolts with allenkey (N).
PLEASE MAKE SURE
THE BOTTOM WEIGHT
PANEL IS POSITIONED
ON THE BACK SIDE
FIG.2.1
BOTTOM
FIG.2.2.1
UPPER
FIG.2.2.2
Publicité
