CF10361
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application:
Chevrolet Cobalt, HHR Pontiac G5, Pursuit | Saturn
Application:
Ion
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
FRAM Group Operations LLC
Danbury, CT 06810-5109 U.S.A.
©2012 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 105 & 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V.
FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Edo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
TOOLS:
TOOLS: None required.
TOOLS:
LOCATION OF CABIN FILTER: Behind the glove compartment, behind the cabin filter access door on the passenger side of the
vehicle.
07-10
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
REMOVE
10 minutes or less
10 minutes ou moins
1. While sitting in the passenger seat, open the glove box (Fig 1) and press inward on the sides to release the stops allowing the
10 minutos máx.
glove box to pull away from the dash.
2. Unclip the dampener cord from the right (passenger) side of the glove box and allow it to retract into the dash. (Fig. 2)
Allow the glove box to hang down toward the floor; the filter housing will now be exposed.
3. Release the three latches on the upper edge of the filter housing door. (Fig. 3)
4. Pull the old filter straight out to remove it from the housing. (Fig 4)
5. Insert the new filter into the housing with its air flow indicator arrow pointing down.
6. Close the filter housing door and re-latch it.
7. Re-clip the dampener cord to the right side of the glove box.
8. To close the glove box, press inward on the sides to re-engage the stops.
1
3
2
4