Publicité
Les langues disponibles
Les langues disponibles
1
[24 1/4"]
Recommended framing:
Prepare wall opening using double stud and
according to the picture measurements
Min opening depth: 110mm [4 3/8"]
3
Install the diaper changing using the 6
provided machine screws
NOTE: DO NOT use power drill to place &
screw the machine screws. In order to avoid
nut thread damage, place the screws by
hand, tight several turns by hand and then
use a screw driver to firmly tight them
KT0016VCS-ASTM / KT0016VCSB-ASTM – Recessed diaper changing station
615 mm
FLOOR / SUELO
Installation guide
2
Place the recessed kit frame to the wall
using the provided screws (for wood studs
only), screw through the mounting holes.
NOTE: Fasteners for other substrates to be
provided by the installer
4
Assembly the liner dispenser according to
the baby station installation manual
9631029ASTM - V.02 - Mar. 2024
Publicité
