Publicité
Les langues disponibles
Les langues disponibles
REMOTE PANIC OPERATION
The ARM / DISARM button on your keychain transmitter also functions as a panic switch for use
in emergency situations. To use remote panic,
1. Press and hold the ARM / DISARM button on the keychain transmitter for 3 or more
seconds. The alarm will immediately sound.
2. To stop the alarm, press and hold the ARM / DISARM button on the transmitter
again for 3 seconds. If the button is not pressed, the alarm will automatically stop
after 30 seconds.
NOTE : All normal transmitter functions will operate in the panic mode.
REMOTE TRUNK RELEASE ( CHANNEL 2 )
This security system is equipped with an on board trunk release relay which will activate the
existing factory installed electronic trunk release mechanism. If your vehicle is not equipped with
an electronic trunk release mechanism, this feature may have been connected to another acces-
sory. Please ask your dealer for further information.
To remotely open the trunk, press and hold button 2 on the keychain transmitter for four seconds.
ADDITIONAL REMOTE FUNCTION ( CHANNEL 3 )
This security system has an additional feature that can be connected to a number of different
optional accessories. Some of the more common uses for this channel are;
Remote Car Starter
Remote Window Closure
Remote Garage Door Interface
To activate the optional accessory, press both buttons on the keychain transmitter simultaneously.
The optional accessory will immediately engage.
Get other manuals https://www.bkmanuals.com
Page 6
128-4631B
6 OF 21
Publicité
