AR AWSEE2BK Guide De Démarrage Rapide page 6

Stereo Setup
4 Enable Bluetooth on your
device (if it isn't already on).
5 Select AR Stereo
of Bluetooth devices available.
If you don't see AR Stereo in the list of Bluetooth devices on your phone, choose "Scan" from
your phone's Bluetooth menu.
Note: The process of enabling Bluetooth and connecting varies from device to device. See
your device's owners manual for more information and specific instructions.
6 Start playing music on your
Bluetooth device.
Note: Make sure your Bluetooth device is
set to at least 75% volume.
6
All manuals and user guides at all-guides.com
Make sure the white Status light on the back
of the left speaker is blinking. (If it isn't, press
and hold the Pair button on the back of the left
speaker until the speaker gives an audio signal.)
Note: If you've previously paired a different
Bluetooth device with this speaker, the speaker
will automatically attempt to reconnect to that
device when you switch the speaker on. If you
want to pair to a new device, press and hold the
Pair button on the speaker until the speaker
gives an audio signal.
from the list
The left speaker says "Connected"
when it's finished connecting to your
smartphone. The white
on the back of the speaker turns solid
white.
The speakers start streaming your
music wirelessly, in True Stereo.
To control the volume, press the + and – buttons
on the back of the left speaker, or use the volume
controls on your Bluetooth device.
If you have two speakers...
Status
Left speaker
Solid white
light