Publicité
Les langues disponibles
Les langues disponibles
Operating the Product
2. Place the gap at the rear corners of the crisper
to the detail located at the rear section of the rails.
3. Place the detail at the front section of the rail to
the gap at the front part of the crisper.
5.27 Hinge Adjustment
When adjusting the hardness of the hinge:
• Hardness of the lower and upper door hinges
of the fresh food compartment is performed
with the help of a drill. Set the hinge
adjustment screw to position "1" from position
"0".
ATTENTION:
A
This adjustment must be made after
the door has been installed and
opened completely.
5.28 Changing the Direction of the
Door
Please see the installation instructions provided in
the bag.
32 / 35 EN
Refrigerator / User Manual
Publicité
