Publicité
Les langues disponibles
Les langues disponibles
Assembly
Two people are recommended for assembly.
CAUTION:
1
Attaching the pegboard
□
Remove bolts (AA) and connecting plates from pegboard (C).
Keep bolts (AA) to use in step 2. Connecting Plates are no
longer needed.
□
With the help of another person, carefully lift the pegboard (C)
up into the upright position as indicated.
□
Position the L-bracket (D) over the holes on the
pegboard (C) and the cabinet (A).
□
Attach the L-bracket (D) with 6 bolts (AA) and tighten with
the hex key (BB) provided.
□
Repeat this process for the other side of the pegboard (C) to
attach it to the cabinet.
2
Attaching the pegboard shelf
□
Place the pegboard shelf (E) onto the brackets (F) and align
holes as shown in Step 1. Secure shelf (E) to bracket (F) with
1 bolt (AA) per bracket and tighten with the hex key (BB)
provided.
□
Position the pegboard shelf brackets (F) over the holes in the
top of the pegboard (C) as shown in Step 2. Secure with
1 bolt (AA) on each side and tighten with the hex key (BB)
provided.
□
Attach the pegboard shelf assembly to the pegboard (C)
using 1 bolt (AA) on each side as shown in Step 3.
The pegboard shelf can be installed in your
NOTE:
choice of locations on the pegboard: Left Side,
Right Side, or Center.
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
A
F
E
Step 1
AA
C
6
D
AA
AA
F
Step 3
Step 2
C
AA
C
Publicité
