Tool it DBT400 Mode D'emploi page 6

START-STOP BATTERY TEST
1.
Press the ▲\▼ key to select START STOP.
START STOP
BATTERY TEST
SYSTEM TEST
2.
Press the  key to select battery type :
a. EFB (ENHANCED FLOODED)
b. AGM
Press «ENTER» to confirm choice
3.
Press the  key to select battery
rating:
SAE, CA, EN, IEC or DIN.
Press «ENTER» to confirm choice.
4.
Press the  key to input
the battery capacity:
SAE (CCA) : 40~2,000
EN : 40~2,100
DIN : 25~1,300
IEC : 30~1,500
CA(MCA) :50~2,500
Press «ENTER» to begin test.
5.
Press the  key to confirm the position of the battery
if the charge is detected. Follow the tester's steps to
remove the surface charge if it happens..
6.
Testing battery.
1. START STOP
EN - 6
BATTERY TYPE
EFB
SELECT RATING
SAE
SET CAPACITY
XXXX SAE
TESTING