Télécharger Imprimer la page

Zephyr brisas BWN24C02AG Guide D'utilisation, D'entretien Et D'installation page 20

Publicité

Les langues disponibles

Les langues disponibles

Operating Your Appliance
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.
Using the Control Panel
Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R "Compressor Running" light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 40ºF is the lowest
available temperature on this unit.
Interior Light
Press this button to turn the lights on and off. The light color is Deep Blue.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time to switch the display
temperature.
NOTE: The wine cooler is equipped with a temperature memory function. If power is suddenly lost, the
previous set temperature will be saved, and the cooler will return to this setting once power is
restored.
20
This wine cooler has a temperature range from 40ºF-65ºF.
BWN24C02AG Use, Care, and Installation Guide
B R I S A S
W I N E C O O L E R
D U A L Z O N E

Publicité

loading