Publicité
Les langues disponibles
Les langues disponibles
USE & TIPS
Start operation
• Cleaning the compartment
Before power on, clean inside of the appliance and check the drainage pipe in good connection.
（ For details, please refer to the "Maintenance and cleaning"）
• Put the appliance stand in place
Before power on, level the appliance on the firm & dry floor for at least 3 hours.
• Power on
The appliance will begin operating and cool down after one hour; if this does not occur, check the
power connection.
Presentation of the user interface
All keys would be invalid if in lock mode. Please unlock first.
ON/OFF
1. To turn off the wine cellar, hold the power button for three seconds. The unit will then power
down and enter standby mode.
2. When the appliance is in standby, press the button again for 3 seconds, and it will start to
operate normally again.
Light
Press the button to switch the LED light inside the appliance on or off.
In standby, this button is deactivated.
Zone switch
Press the key to switch between upper zone and lower zone for
choosing which zone to set temperature. Press the key once, the LED
display in chosen zone flash regularly. Press up and down key to set
temperature. Press the key again; switch the zone to set temperature
To increase the temperature
Press the button once and the LED screen flashes regularly to display the current
temperature setting. Keep pressing the button to adjust the temperature, one press increases
the temperature by 1°C.
If you stop pressing the button for more than 5 seconds, the screen stops flashing and the
new temperature is set. The LED screen displays the new current temperature inside the
appliance.
31
Publicité
