Publicité
1.50% Tighten before fixing all screws, Allen wrench is recommended
instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains
stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please
loosen all the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat
ground and tighten up all screws again.
6. Note: If one or some screws are fully tightened during assembly,
chances are the others will not be aligned with holes. In addition, all the
holes are designed to be relatively larger to provide more space for the
adjustment of the screws.
Part list / Liste des pièces
x
B x 1
A
1
G x 1
H x 2
K x 2
Hardware list / Liste des accessoires
1 x14
2 x4
Bolt M6x40mm
Bolt M6x25mm
/ Boulon
/ Boulon
5 x18
6 x1
M6x1 Washer
Allen key M4
/ Rondelle
/ Clé Allen
E x 1
F x 1
I x1
J x 2
3 x4
4 x8
Bolt M6x15mm
Foot Cap M6x12mm
/ Boulon
/ Capuchon de pied
Publicité
